On June 8, the 21st China International Petroleum and Petrochemical Technology and Equipment Exhibition (CIPPE 2021) opened at the new International Exhibition Center in Beijing.

Ma Peihua, vice-chairman of the CPPCC National Committee, declares the CIPPE 2021 open.

 

Li Yizhong, former Minister of the Ministry of industry and Commerce and President of China Federation of industrial economy, speaks during the opening of CIPPE 2021.

 

Wei Jianguo, former Vice Minister of the Ministry of Commerce and vice director of the China International Economic Exchange Center, speaks during the opening of CIPPE 2021.

 

Liu Hongbin, member of the leading Party members’ group and deputy general manager of the China Petrochemical Corporation (SINOPEC), and President of China Petroleum and Petrochemical Equipment Industry Association, speaks during the opening of CIPPE 2021.

 

Wang Junqiao, general manager of Sinopec Oilfield Equipment Corporation, and Chi Shenggao, senior expert of Sinopec, attend the opening ceremony.

 

Ma Peihua (middle), vice chairman of the CPPCC National Committee, and Li Yizhong (second from left), former Minister of the Ministry of industry and Commerce and President of China Federation of industrial economy, visit Sinopec booth accompanied by Liu Hongbin (second from right), member of the leading Party members’ group and deputy general manager of the China Petrochemical Corporation (SINOPEC), and President of China Petroleum and Petrochemical Equipment Industry Association, and Zhang Xueshan (first from right), CEO of Zhenwei Exhibition Co., Ltd.

Zhang Yuzhuo, chairman and party secretary of Sinopec Group., visits Sinopec booth; Wang Junqiao, general manager of SOFE, introduces the scientific and technological R & D work and development direction of SOFE.

 

LV Bo, deputy general manager of CNPC, and Wang Hu, deputy general manager of CNPC Xibu Drilling Engineering Company Limited (XDEC). visit Sinopec booth.

 

In the center of Sinopec booth is the 2500HP cementing truck with the largest installed power in the world, developed and manufactured by SJPETRO.

The mixing capacity of 2500HP cementing truck ranks first in the world.

Super-HEMI large displacement mixing system developed by SJS;
Super high energy jet mixer, and the maximum mixing capacity is 76% higher than that of conventional mixing system, meeting the needs of ultra-deep and large displacement cementing operations;
Stable mixing density.

 

The latest intelligent full-process remote automatic control system developed by SJS is technically upgraded on the basis of the ACM automatic mixing system, designed with the function of "full-process control of job".

By setting parameters such as displacement and density at each phase of the job, the system controls the slurry mixing and pumping process to achieve one-button automatic operation of cementing equipment;
Equipped with remote control system based on IoT cloud service to achieve remote control of on-site pumping operation, online data acquisition and management;
To achieve remote fault diagnosis, Expert Database analysis and digital operation and maintenance management.

Show of this equipment at the Beijing CIPPE 2021 will lead the cementing equipment to develop in the direction of high power, small well site, intelligence and digitization, and provide technical support for the second-generation cementing equipment for oil and gas drilling and completion operations.

 

---

The following products from SOFE are also on display in this exhibition.

SERVA QPE 1600 Quintuplex Plunger Pumps

The QPE 1600 is a reciprocating, horizontal single-acting, quintuplex plunger pump for continuous well service, which is rated at 1,600 brake horsepower input maximum. The pump is good for cementing, acidizing, fracturing and other conventional service, especially for long-time coiled tubing service.
Arrangement of double pump can be achieved in The North American market, with power of 3,200 HP and a maximum working pressure of 20,000 psi.

 

PFT-180 Nitrogen Foam Cementing Equipment

Low slurry density, with minimum foam slurry density of 0.35 g/cm³；
Stable mud property;
High rated working pressure, up to 40 MPa;
Monitoring of parameters in real-time.
Equipped with remote control system and IoT platform.

 

CSGS/T-960 High Displacement Mixing Equipment

Twin injector mixing system, with maximum ratio of 6 ‰ and maximum displacement of 16m3.
Twin powder tank;
Vacuum feeding;
Twin pump.

 

PCSE-621A Marine Deepwater Electrically-Driven Explosion-Proof Twin Pump Cementing Skid

Motor driven, adapt to power system of offshore platform;
Overall explosion-proof design for Zone II; 
Modular design;
System redundancy design; 
Auto control of full-process of cementing operations; 
Local & remote control;
Latest SUPER-ACM density automatic control mixing system.

PCS-1500B High Displacement Twin Pump Cementing Skid

High total installed power;
Meet the operation requirements of large displacement and high pressure;
Maximum displacement of 4.5 m³/min;
Twin mixing system;
SUPER-ACM density automatic control mixing system and remote control room for remote cementing operations;
Can temporarily replace mud pump for operation;
Plunger pump overpressure protection system;
Emergency system;
Portable wireless data acquisition system.

 

Downhole Oil Tools

5" dissolvable bridge plug
5" dissolvable metal bridge plug
Toe-end sliding sleeve
Downhole safety valve
Anti-sulfur packer string - top packer, ball-activated sliding sleeve, open hole packer, differential pressure sliding sleeve, isolating valve, float shoe
Sleeve connector
Reversing jet tool
Y441 HTHP gas seal packer
Dissolvable packing element
HTHP packing element
Gas seal packing element