The ZQJ/S Mud Cleaner, also called Desander and Desilter assembly, integrates desander, desilter and chock manifold mounted over a shale shaker to operate as a single unit. Mud Cleaner is the second class and the third class solids control equipment for separation of solid particles above 0.02 mm, with a maximum treatment capacity is 56 L/s; The treated drilling fluid can be directly used or further separated by medium and high-speed centrifuges.

The EWT-40 Self-Loop Well-Flushing Truck is a truck mounted unit for flushing of oilfield water injection wells. It is designed with functions of circulating well washing under pressure and on-line backwashing, featuring easy operation and excellent performance. This product is used for treatment of the returned fluid from the water injection wells, removing suspended solids, Oils and other pollutants, and reinjecting it into the water wells for closed-cycle well flushing.

The EFS-60 Fracturing Flowback Fluids Treatment Equipment adopts physical and chemical treatments such as pretreatment, acid-base neutralization, electro flocculation, air flotation, filtration / adsorption, sterilization and reverse osmosis to reduce the content of pollutants in flowback fluid. Chemical treatment and electro flocculation treatment are available for option.

With the solid-liquid separation technology, this product uses chemical agents and integrates high-frequency vibrating screen, dewatering centrifuge, filter press, dehydrator, filter, reverse osmosis unit, screw conveyor and other devices to reduce harmful composition in solids and recycle serviceable drilling fluid. The water quality after treatment meets the requirements of preparing drilling fluid.

This product is mainly used to transfer, delivery and store the drilling cuttings discharged from the well cementing system.

This DTTD device is mainly used to treat oily waste generated in the process of drilling. The heat generated by the friction between the rotor and the material is used to raise the temperature of the materials, so that the organic matter of petroleum hydrocarbons can be evaporated and cracked. It features compact structure, light weight and flexible and modular design. It is designed to meet the emission standard, known as the best available technique (BAT) and the best environmental technology (BEP);

SERVA TPH 400 Triplex Plunger Pumps are good for high-pressure well service. Each pump is equipped with a gear case. The Triplex Pumps are designed to pump cement slurries, sand-laden fluids, crude oil, acids, mud and other oil well servicing fluids.

SERVA TPD/TPE 600 Triplex Plunger Pumps are used for cementing and acidizing service. Their short length allows back-to-back placement of two pumps on the unit with less than 102" total width. TPE 600 pumps can be more effective in preventing the leaking fluid from entering the power end.

SERVA QPA/QPE 1000 Quintuplex Plunger Pumps are good for high-pressure well service. Each pump is equipped with a gear case. The Quintuplex Pump is designed to pump cement slurries, sand-laden fluids, crude oil, acids, mud and other oil well servicing fluids. QPE 1000 pumps can be more effective in preventing the leaking fluid from entering the power end.

The TPA-2250 is a reciprocating, positive displacement, horizontal single-acting, triplex plunger pump which is rated at 2,250 brake horsepower input maximum. The pump is designed for severe-duty well service applications such as acidizing, fracturing, well killing, etc. The TPA-2250 Pump consists of a power end assembly and a fluid end assembly. Different fluid cylinders are available to accommodate several plunger sizes for a variety of pressures and volumes.

The QPE 1200 is a reciprocating, horizontal single-acting, quintuplex plunger pump for continuous well service. The pump is especially good for long-time coiled tubing operations.
The QPE 1200 pump passed the test for 100 hours of continuous operation at 110% of maximum pressure.

The QPE 1600 is a reciprocating, horizontal single-acting, quintuplex plunger pump for continuous well service, which is rated at 1,600 brake horsepower input maximum. The pump is good for cementing, acidizing, fracturing and other conventional service, especially for long-time coiled tubing service.
Arrangement of double pump can be achieved in The North American market, with power of 3,200 HP and a maximum working pressure of 20,000 psi.