PST-621B Twin-Pump Truck
This product is designed for oilfield operations such as acidizing and fracturing, well cleaning and sand flushing, and plug removal. It is powered by an engine that drives a TPD600 plunger pump via a 4700 transmission gearbox and drive shaft, while a power take‑off unit simultaneously powers a hydraulic oil pump to supply energy to a centrifugal pump. Local and remote control of one or multiple acidizing units can be implemented on site.
Product Specifications
|
Chassis vehicle |
Imported Mercedes-Benz chassis; 8x6; MAN 8x6 chassis available as an option. |
|
Engine |
CAT C15 540hp |
|
Transmission box |
ALLISON 4700 |
|
Plunger pump |
TPD600 (3", 3 1/2", 4", 4 1/2" optional) |
|
Perfusion centrifugal pump |
SERVA 5X6 (one unit per plunger pump) |
|
Fuel tank capacity |
540+430L |
|
Control system |
Manual operation / Automatic control (remote control system optional) |
|
Maximum discharge pressure |
103.4 MPa (15,000 psi) |
|
Maximum discharge capacity |
2.1+2.1 m³/min (TPC 600 4 1/2”) |
|
Approximate size: |
11500mm X 2550mm X 4000mm |
|
Net weight approximately |
32,000 kg |
|
Operating temperature |
-20℃~﹢50℃ |
Product Features
- IoT System: By integrating the IoT system with on-site equipment, this solution enables asset and equipment localization, visualization of instrument curves, standardization of maintenance and upkeep procedures, and traceability of fault information. It progressively achieves visibility of equipment data, trackability of asset movement, verifiability of operational status, synchronization between physical and digital environments, and seamless integration of contextual insights—thereby optimizing equipment management, maintenance planning, spare parts control, and the formulation of energy‑saving strategies, ultimately reducing downtime.
- Equipped with a data acquisition system;
- Control room and control console available as options;
- The manifold and valves are made of corrosion-resistant materials and can withstand hydrochloric acid at concentrations of up to 35%.
- Configure a plunger pump with an SPS leak-free packing system.
- An optional external fuel‑powered heater is available, suitable for operation in extremely cold regions during winter. Prior to winter operations, the engine coolant is forcibly circulated and heated until the engine block temperature reaches the required starting threshold.
