This product is used for connecting fracturing units with other units. It consists of high- and low-pressure manifolds and pipe fittings, high-pressure pipe rack and low-pressure pipe rack. It is installed and positioned for ease of repairs and maintenance. The unit is capable of operating in temperatures ranging from －20℃～+45℃.

With IHF 125-100-200 centrifugal pump equipped to continuously provide non-corrosive or corrosive fluids to meet job requirements.

With SCP 10X8X14 centrifugal pump equipped, this product is mainly used for pumping clean water, acidizing fluid and liquid additives after pressurization via a centrifugal pump to transfer the fluid out for oil well cementing and acidizing operations.

With SCP 10X8X14 centrifugal pump equipped, this product is mainly used for pumping clean water, acidizing fluid and liquid additives after pressurization via a centrifugal pump to transfer the fluid out for oil well cementing and acidizing operations.

With SCP 12X10X22 centrifugal pump equipped, this product is mainly used for pumping clean water, acidizing fluid and liquid additives after pressurization via a centrifugal pump to transfer the fluid out for oil well cementing and acidizing operations.

This product is used for well acidizing, fracturing, well washing, blockage removing, etc. It is powered by the engine to drive the TPH400 plunger pump via 4700 transmission and drive shaft and the centrifugal pump via PTO.

This product is used for well acidizing, fracturing, well washing, blockage removing, etc. It is powered by the engine to drive the TPH400 plunger pump via 4700 transmission and drive shaft and the centrifugal pump via PTO.

This product is used for well acidizing, fracturing, well washing, blockage removing, etc. It is powered by the engine to drive the TPC600 plunger pump via 4700 transmission and drive shaft and the centrifugal pump via PTO.

This product is used for well acidizing, fracturing, well washing, blockage removing, etc. It is powered by the engine to drive the TPC600 plunger pump via 4700 transmission and drive shaft and the centrifugal pump via PTO.

This product is used for well acidizing, fracturing, well washing, blockage removing, etc. It is powered by the engine to drive the TPH400 plunger pump via 4700 transmission and drive shaft and the centrifugal pump via PTO.

This product is used for well acidizing, fracturing, well washing, blockage removing, etc. It is powered by the engine to drive the TPD600 plunger pump via 4700 transmission and drive shaft and the centrifugal pump via PTO.

This product is used for well acidizing, fracturing, well washing, blockage removing, etc. It is powered by the engine to drive the TPD600 plunger pump via 4700 transmission and drive shaft and the centrifugal pump via PTO.

This product is mainly used to add liquid additives and discharge them after reaching a certain pressure to meet the needs of special process for cementing and fracturing operations in oilfields.

The liquid additive system (LAS) is designed to continuously add liquid additives into the cement slurry during the process of offshore oilfield cementing operations. This product is equipped with one explosion-proof frequency converter motor (55KW,460V/60HZ), one set of hydraulic system, four 350gal liquid additive tanks, mass flowmeter(s), data acquisition system, and control and monitoring system.

This product is designed with a discharge rate ranges of 4 m³/min - 8 m³/min. Both integrated and divided layout designs can be offered. The self-developed base fluid automatic mixing control system is configured to achieve automatic control of discharge rate, mixing ratio and chemical additives in local or in data van.

This product is designed with a discharge rate ranges of 4 m³/min - 16 m³/min. Both integrated and divided layout designs can be offered. The self-developed base fluid automatic mixing control system is configured to achieve automatic control of discharge rate, mixing ratio and chemical additives in local or in data van.